How to Clean Sandstone Pavers

Short answer

Sweep away loose debris first, then use a soft brush with a pH-neutral cleaning product: the same gentle approach that applies to any sandstone surface, adjusted for paving's exposure to foot traffic and outdoor weathering. Working in manageable sections and rinsing thoroughly as you go, rather than covering a large area with cleaning solution before rinsing any of it, helps prevent the product from drying onto the surface and leaving its own residue behind.

Trusted By Our Satisfied Clients

Paver-Specific Considerations

Sandstone paving faces joint sand and weed growth between pavers, plus ongoing exposure to moss and algae from outdoor moisture and shade. Foot traffic can also wear a paved area faster than a vertical surface like a wall. Individual pavers can also vary in colour and porosity even within the same batch, which is a natural characteristic of sandstone rather than an inconsistency. Expect some visible variation between pavers even after an identical cleaning approach is applied evenly across the whole area.

What to Avoid

Paving carries the same risks as any sandstone surface where acidic cleaners, an overpowered pressure washer setting, or heavy scrubbing are concerned, all of which can mark or wear the stone rather than simply clean it. For the full reasoning, see general sandstone DIY cleaning guidance.

Dealing With Joint Weeds

Weeds growing between sandstone pavers are best removed by hand or with a targeted approach rather than aggressive scraping, which risks chipping the paver edges. Sandstone’s relatively soft edges are more prone to this kind of damage than a denser paver material would be, so patience matters more here than with, say, a concrete paver.

When a Professional Clean Is Warranted

Heavier moss or algae build-up, staining that won’t shift with gentle cleaning, or simply the scale of a large paved area are all reasons to bring in a professional instead. See professional sandstone paving clean for that option. A large driveway or entertaining area can take considerably longer to work through by hand than a small feature, which is often reason enough on its own to bring in a professional even when the soiling itself isn’t severe.

FAQs

Does paver colour variation mean some pavers weren’t cleaned properly?

Not necessarily. Natural colour and porosity differences between individual pavers, even from the same batch, often remain visible after cleaning since that variation comes from the stone itself rather than the cleaning process.

Can sandstone pavers be sealed to reduce weed growth in joints?

Sealing can help slow both weed regrowth and joint sand loss for many sandstone paver installations. See sealing sandstone pavers for more detail.

Is it safe to use a pressure washer on sandstone pavers at a low setting?

Low settings reduce but don’t eliminate risk: sandstone’s softness means even a moderate setting used incorrectly (too close, held in one spot too long) can cause damage, so caution is still warranted.

Should I clean sandstone pavers before or after weeding the joints?

Weeding first is generally more effective, since it clears the joint of obstructions before you clean, rather than cleaning around growth you’ll disturb moments later.

Need sandstone cleaning done professionally?

Protek Cleaning services Brisbane, Moreton Bay, Logan and Redlands. Request a quote on the sandstone cleaning page.

Get A Quote04 7908 3571

Need Professional Sandstone Cleaning in Brisbane?

Tell us what needs cleaning and we will get back to you with a quote.